UH70

Product code: UH70

Mounting type UH is particularly suitable for the suspension of both mobile and static cabs as well as platforms on agricultural vehicles.

Effectively isolating vibration and noise, the UH-mounting also protects tanks and ancillary equipment against metal fatigue caused by chassis distortion.

Specific applications can be found on:

  • Tractors
  • Combine Harvester
  • Wheel mounted loaders
  • Street Sweepers
  • Compactors
  • Lifting cranes
  • Construction vehicles
  • Forestry vehicles
  • Off-road equipment
  • Fork-lift trucks
  • Excavators

Features

UH is an antivibration mounting designed to accommodate axial static and shock loads in both directions. The dynamic natural frequency is constant irrespective of the static load.

When fitted with overload/rebound washers, a high strength fail-safe installation is provided. Moreover, it is possible to alter the characteristics if the mounting by providing a dome-shaped washer at the upper rubber section. This will provide impact resistance to deflection beyond the permissable limit.

UH is available in 2 standard versions allowing different maximum loads, i.e. UH50 to a load of 250kg, and type UH70 to 400kg per mounting.

Note: Maximum tightening torque of bolts:

  • UH50   80Nm
  • UH70   120Nm
A - Length 100.5mm
A2 - Length 80.4mm
C- Height 37mm
E - Hole Diameter 17mm
Durometer - IRH 70
Weight 0.41kg
Max Load - Compression 400kg
Max Deflection - Compression 8.0mm