SAW300A

Product code: SAW300A

Novibra elements type SAW are heavy duty mountings for static and shock loads in compression. They provide high isolation in the horizontal shear deirection.

Typical fields of application are:

  • Crushers
  • Edge runners
  • Mills
  • Hoppers and feeders
  • Grinders
  • Vibratory rollers
  • Screens
  • Other very heavy machines and equipment

Features

Novibra type SAW mountings consist of a cylindrical shaped rubber section with integrally bonded interleaf metal plates bonded to two square heavy duty outer metal fixing plates. Designed for large compressive forces with minimum deformation, while providing low shear stiffness rates

The combination of a stable low installation height, high compressive strength and low shear stiffness makes Novibra type SAW a versatile high performance antivibration mounting. Ease of installation due to 4 clearance holes in each fixing plate.

By connecting 2 SAW elements in series, i.e. one on top of the other, an increased isolation efficiency is achieved in both shear and compression planes. Where larger deflections are required in the vertical plane, Novibra type SAW mountings are mounted at a calculated angle configuration to provided the optimum spring rate.

A - Length 310mm
A2 - Length 270mm
C- Height 120mm
E - Hole Diameter 22mm
Durometer - IRH 40
Weight 27kg
Plate Thickness 10mm
Max Load - Compression 15000kg
Max Deflection - Compression 9.2mm
Max Load - Shear 1575kg
Max Deflection - Shear 45mm