Double U-shear

Novibra type BA and Metalastik type Double U-shear are equally suitable
for isolating vibrations from low speed machines and equimpent. Protects
sensitive and light weight units from external shocks and vibrations.

Type BA and Double U-Shear are easy to install and ideal for applications
such as:

• Light fans and compressors

• Portable gensets and pumps

• Computers and electronic units

• Transit cases

• Measuring and test instruments

• Gauging equipment

Features

Novibra type BA and Metalastik type Double U-Shear mountings utilise bonded
rubber in shear to permit relatively high deflections. Provides excellent
isolation of low frequencies. (Type BA 20/2 is a half section suitable
for very light loads). On rotating equipment applications, the soft axis
should be at right angles to the shaft. On mobile applications, the stiff
axis should be aligned in the direction of travel. For transit case applications,
the mountings need to be arranged so that the horizontal stiffness is the
same in all directions.

Name Length (mm) Width (mm) Height (mm) Hole Diameter (mm) Durometer - IRH Weight (kg) Max Load - Shear (kg) Max Deflection - Shear (mm)

Double U-Shear 17-1492-40

60 19 43 6.7 40 0.09 14 8

Double U-Shear 17-1492-50

60 19 43 6.7 50 0.09 20 8

Double U-Shear 17-1480-40

80 51 78 13 40 0.6 70 8

Double U-Shear 17-1480-50

80 51 78 13 50 0.6 100 7.5

Double U-Shear 17-1479-40

86 64 108 16.7 40 1.1 150 8

Double U-Shear 17-1479-50

86 64 108 16.7 50 1.1 220 8

Double U-Shear 17-1482-40

60 51 41 11 40 0.2 37 8.5

Double U-Shear 17-1482-50

60 51 41 11 50 0.2 56 8.5