The Anti-Vibration Plate is intended, primarily, for applications with
low requirement for vibration isolation. Typical installations are machinery
generating vibrations in the high frequency range, and tall unstable installations,
requring secure attachments to the foundation.
If insufficient deflection is achieved with a single layer, multiple
layers can be used by separating each layer with a weight distributing
steel plate. In order to avoid direct contact between machine and foundation,
a rubber bush (e.g. rubber hose) should be installed in the mounting holes
prior to installation of bolt and rubber washer.
Suitable applications are:
- Pillar drills
- Large pumps
- Printing preses
- Industrial fans
- Horizontal drill presses
- Texitle mechinery
- Large forging presses
The AV Plate, made of oil and grease resistant rubber material, is available
either as a single (4.5 mm) or double (8 mm) version. The single version
has ribs on one side only, while the double has ribs on both sides applied
at a 90 degree angle to each other.
Good performance is obtained when using Novibra AV Plate in the building
and construction industry as support pads between flooring and joists.
This application provides for cushioning of loads and isolation of high
frequency vibrations within the building.
|Name||Length (mm)||Width (mm)||Height (mm)||Weight (kg)|