Rectangular SAW

Widely used for suspending engines on road vehicles and may also be employed
as springs for vibratory equipment.

Rectangular SAW mounts are also known as “Sandwich” mountings because
they feature a rubber section sandwiched between plates of metal. This
arrangement allows a large difference between the compression and shear
stiffnesses, thus providing the potential to ‘tune’ a mounting system by
rotating the mountings. These mountings are commonly installed in a ‘Vee’
formation to utilise this feature.

Features

  • Available with plate or stud fixings
  • Can be loaded in compression or shear, or a combination of both, for example
    in a ‘Vee’ arrangement.
  • Can be manufactured with or without interleaves to change the ratio of
    shear to compression stiffness.

Name Length (mm) A2 - Length (mm) A3 - Length (mm) Width (mm) Height (mm) Hole Diameter (mm) Durometer - IRH Weight (kg) Stud Size Plate Thickness (mm) Max Load - Compression (kg) Max Load - Shear (kg)

Rectangular SAW 31-0322-45

108 89 63.5 57 43 11 45 0.65 5 180 50

Rectangular SAW 31-0322-60

108 89 63.5 57 43 11 60 0.65 5 360 75

Rectangular SAW 31-0242-45

168 146 127 57 43 11 45 1.1 5 450 120

Rectangular SAW 31-0242-60

168 146 127 57 43 11 60 1.1 5 900 150

Rectangular SAW 31-0242-70

168 146 127 57 43 11 70 1.1 5 1050 150

Rectangular SAW 31-0406-45

89 74.5 54 41 36 6.5 45 0.23 M8x14 2.5 90 40

Rectangular SAW 31-0406-60

89 74.5 54 41 36 6.5 60 0.23 M8x14 2.5 180 70

Rectangular SAW 31-0406-70

89 74.5 54 41 36 6.5 70 0.23 M8x14 2.5 250 90

Rectangular SAW 31-0285-45

168 146 127 57 43 11 45 0.9 5 275 150

Rectangular SAW 31-0285-60

168 146 127 57 43 11 60 0.9 5 546 150