Novibra Type 3″ COMP-60
Product code: 3" Comp-60
- Metalastik type Rectangular SAW Mountings and Novibra Type 3″ COMP
- Widely used for suspending engines on road vehicles and may also be employed as springs for vibratory equipment.
- Rectangular SAW mounts are also known as “Sandwich” mountings because they feature a rubber section sandwiched between plates of metal. This arrangement allows a large difference between the compression and shear stiffnesses, thus providing the potential to ‘tune’ a mounting system by rotating the mountings. These mountings are commonly installed in a ‘Vee’ formation to utilise this feature.
- Features
- Available with plate or stud fixings
- Can be loaded in compression or shear, or a combination of both, for example in a ‘Vee’ arrangement.
- Can be manufactured with or without interleaves to change the ratio of shear to compression stiffness.
| A - Length | 182mm |
| A2 - Length | 146mm |
| C- Height | 76mm |
| E - Hole Diameter | 13mm |
| Durometer - IRH | 60 |
| Weight | 3.4kg |
| Plate Thickness | 7.5mm |
| Max Load - Shear | 280kg |
| Max Deflection - Shear | 13mm |