Double Shear Isolator M10060

Product code: M10060

This isolator is particularly versatile and suitable for all types of machinery and structures. The M100 is well suited to installations that require the isolator to resist the sideways pull with belt driven loads and to maintain the centre distance for gears, without a loss of isolation efficiency in the vertical direction.

The isolator consists of three steel members which are securely bonded to two sections of rubber in its most effective manner, i.e. in shear with progressively increasing compression.

The M100 mount is available in 50 and 60 durometer. The mounting holes can be drilled to suit individual requirements. The isolator can be bolted or welded to a separate retention plate if preferred, but SECURE fixing is generally recommended.

IMPORTANT: The M100 isolator should be securely fixed to the foundations before the load is applied, to prevent the mount spreading, and therefore not allowing it to achieve the correct deflections.

The standard lengths are 150mm and 300mm. If a load rating calls for smaller lengths, it is an easy matter to cut to the required size.

B - Width 129mm
B2 - Width 20.5mm
C- Height 36.5mm
Durometer - IRH 60