V-Shaped Generator Isolator M148171
Product code: M148171
TheV-Shaped Generator supports are comprised of 2 symmetricall-tilted parts with a screw on each side.
The V-Shaped Generator Mounts render it possible to make installations which are more elastic than the ones usually made with cylindrical or bobbin mounts. This makes it possible to achieve lower frequency and consequently better vibration isolation.
Stability is enhanced when two mounts are installed symmetrically opposed.
They have two different length screws which facilitate the assembly of the engine to the chassis.
They have two “anti-turn” tabs which stop the mount from turning when strong tightening torque is applied (very frequently) with pneumatic tools.
They are supplied in 2 hardnesses to accommodate different load ranges.
They provide vibration attenuation of above 90% in diesel or petrol single-cylinder engines running at 3000 rpm.
Very low load engines requiring high levels of isolation.
- Portable Gen-sets
- Motor pumps
|B - Width||54mm|
|Durometer - IRH||45|
|Max Load - Compression||43kg|
|Max Deflection - Compression||9mm|